premierpolaris.blogg.se - Audio driver for xonek2 mac

AUDIO DRIVER FOR XONEK2 MAC MAC OS X
AUDIO DRIVER FOR XONEK2 MAC DOWNLOAD

Xone:K2 and the Traktor Audio 10? Can you? We can't.

AUDIO DRIVER FOR XONEK2 MAC DOWNLOAD

We set three hotuces in the recorded wave file to mark the blends asĬheck yourself! Download the recording to see if you can hear any difference between the audio coming from the The next four bars come from channel 2 (Xone:K2 Master out) and the rest of the recording comes via In the first four bars after the break you hear the sound from channel 1 as well. The recording starts with the break on the track where audio is coming from deck A (channel 1 of the mixer, headphone socket of the K2). With a little recording tool on the Mac using the Record Output of the mixer. We loaded a track in WAV format into deck A of Traktor, played it and then created a duplicate in deck B and another one in deck C. And finally the Main Output of the Traktor Audio 10 was connected to channel 3. Master Output of the K2 (rear of the controller) was connected to channel 2 of the mixer using RCA/cinch cables. The Headphone Output of the K2 (front of the controller) was connected to channel 1 of the mixer (a Xone:DB4) using a 3.5mm jack to RCA/cinch adapter cable (a quite cheap one). The Sample Rate in Traktor was set to 44.1 kHz and the Latency Buffer was set to 128, resulting in an overall latency of 4.9ms.

Output 4/5, Deck C: Traktor Audio 10, Master Out.

Output 2/3, Deck B: Xone:K2 Master Out (Cinch).

Output 0/1, Deck A: Xone:K2 Headphone Socket.

To test the sound quality of the two stereo channels in external mixer of Traktorįirst we created an aggregated audio device from Xone:K2 and Traktor Audio 10 and used the following soundcard channels for Traktor decks A-C: On Windows only two channels can be used unless you have installed the ASIO driver once the supplied ASIO driver is installed all four channel will be available. The audio interface is class compliant and all four channels are immediately available. Simply connect the K2 to a USB port of your Mac.

AUDIO DRIVER FOR XONEK2 MAC MAC OS X

Setup on Mac OS X is as easy as it can be. The audio interface can be used with either a sampling rate of 44.1 kHz or 48 kHz. Xone:K2 has an integrated four channel audio interface (16 bit). In preparation for some more extensive video reviews and tutorials about the Xone:K2 Is the soundcard good enough that it can be an alternative for and replace, for example Traktor Audio 6 or Traktor Audio 10 in anĮxternal mixer setup (no timecode usage, see the setup example in One of the most often asked questions we received after our reviews of the Allen&Heath Xone:K2 was about the quality of the integrated audio interface.